Overview
FleetWatcher uses certifications in three places. They work in different ways. One of them depends on the Blocks Dispatch setting on a certification type. The other two depend on the required certification types on an equipment type.
A driver is missing a certification when the driver has no record for it, or when the record is expired.
Use this article to find which one you see, why it shows, and what to do.
1. Blocks Dispatch on the Dispatch Board
Where you see it: MMS > Dispatch > Dispatch Board.
What turns it on: The Blocks Dispatch setting on a certification type. You set this on the Manage Certifications page.
When it applies: The driver has a record for that certification type, the record is expired, and Blocks Dispatch is on. A driver with no record for the type is not blocked.
What happens: The dispatcher cannot add the driver to a dispatch order. When the dispatcher selects the driver’s name, the Certification Renewal window opens.
Can the dispatcher continue anyway: No. The dispatcher must renew the certification first.
How to fix: Renew the certification. See Blocks Dispatch: Renew a Driver’s Expired Certification on the Dispatch Board.
2. Required Certification Types on the Assign Drivers to Equipment page
Where you see it: Manage > People > Assign Drivers to Equipment.
What turns it on: Required certification types on a custom equipment type. You add them in Manage > Equipment > Add/Edit Custom Equipment Types.
When it applies: The driver has no valid record for each certification that the equipment type requires.
What happens: After you select effective now or effective on custom date, the Missing Required Certifications window opens. It lists the certifications.
Can the dispatcher continue anyway: Yes. Select Assign Anyway. Select Cancel to stop.
How to fix: Update the driver’s certification records. See Assign a Driver to Equipment When the Missing Required Certifications Warning Appears.
3. Required Certification Types in the driver app
Where you see it: The driver app, after the driver selects Start Driving.
What turns it on: The same required certification types on the custom equipment type as in number 2.
When it applies: The driver has no valid record for each certification that the equipment type requires.
What happens: The Certification Expired message shows. The only button is Close. The driver cannot select the truck and cannot start driving.
Can the driver continue anyway: No. A dispatcher or manager can assign the driver to the equipment, and then the app changes to Driving. This lasts only while the driver stays in Driving. If the driver stops driving, the message shows again until the certification is updated.
How to fix: Update the driver’s certification records. See Fix the Certification Expired Message in the Driver App.
What is the same, and what is different
Number 2 and number 3 use the same required certification types. If you remove a certification type from the equipment type and save, the block and the warning stop for that equipment. This applies to equipment that already exists and to new assignments.
The warning in number 2 and the message in number 3 list every required certification. They do not show which ones the driver is missing and which ones are expired. To check, go to Manage > People > Certification Status and look at the driver’s records.
Assigning a driver to equipment is also called coupling.
Related articles:
CONTACT US!
Email us: support@fleetwatcher.com
