Overview
The Driver Safety Leaderboard shows the safety results of all your drivers for the dates you pick. This article explains the three charts and the All drivers table. Use them to see which days, which infraction types, and which drivers have the most infractions.
An infraction is one time the system recorded an action by a driver, such as Mild Speeding or Phone Use.
To open the page:
If your company uses FleetWatcher Cameras, select Cameras in the top menu. Then select Driver Safety Leaderboard in the left menu.
If your company does not use FleetWatcher Cameras, select Fleet > Driver Safety > Driver Safety Leaderboard.
The page has three charts:
Infractions across all drivers, per day shows the total infractions for each day.
Type breakdown for this period shows which infraction types happened, and how often.
Total Incidents shows the infractions for each driver.
The All drivers table lists each driver with a Grade, a Driver Score, miles, hours, and infractions. The table also has one column for each infraction type. To see the full safety record of one driver, select the driver’s name. The Driver Safety Details page opens.
The Table Settings filters and the Show/Hide columns icon control the same setting. A change in one also changes the other. Both change the charts and the table.
To set the company, dates, and filters, see Driver Safety Leaderboard: Filters, Table Settings, and Print.
Charts
Infractions across all drivers, per day
A graph that shows how many infractions all drivers had on each day of the selected dates.
The bottom of the graph shows the dates. The left side shows the number of infractions.
To see a different period, change the Start date and End date at the top of the page. Then select GET SUMMARY. The dates on the graph change to match.
A high point shows a day with many infractions. A flat line at 0 shows a day with no infractions.
Hover over the graph to see the date and the number of infractions for that day. When the Start date and End date are the same day, the graph shows one dot for that day. You do not need to hover to see it.
The graph shows one total for all drivers. It does not show each driver or each type separately. To see each driver, use “Total Incidents”. To see each type, use “Type breakdown for this period”.
The text under the graph shows the total for the period. For example, “80 infractions in this period”.
The Table Settings filters and the Show/Hide columns icon change this graph. See “Filters and the Show/Hide columns icon.”
Type breakdown for this period
This section shows which types of incidents happened in the selected dates, and how often each type happened.
Each row shows one incident type, such as Mild Speeding or Phone Use.
The list shows only the types that happened in the selected dates. The type with the most incidents is first.
The bar length shows how often that type happened compared to the other types.
The numbers on the right show the count for that type and its percentage of all incidents.
The bar color shows the group for that type. The color key is at the top of the section. Each color matches one of the four filter dropdowns in Table Settings:
Blue: Speeding and Braking (all devices)
Orange: ADAS Alerts (camera only)
Green: Driver Monitoring (camera only)
Gray: Other (camera only)
The Table Settings filters and the Show/Hide columns icon change this section. See “Filters and the Show/Hide columns icon.”
Note: The percentages are rounded. The total can be a little more or less than 100%.
Total Incidents
A bar chart that shows the infractions for each driver in the selected dates. Each driver has one bar.
The length of a bar shows the total number of infractions for that driver. The scale at the bottom is labeled “Infractions”.
The driver with the most infractions is at the top.
A driver with no infractions in the selected dates does not show in this chart.
Each color is one infraction type. The legend above the bars shows the color for each type. The legend lists only the types that happened in the selected dates.
Each colored part of a bar shows how many infractions of that type the driver had. A wider part means more infractions of that type.
Hover over a driver’s bar to see a list of the types in the legend, with that driver’s count for each one. A type with no infractions shows 0. The driver’s name is at the bottom of the list.
The colors here are not the same as the colors in “Type breakdown for this period”. This chart uses one color for each type. “Type breakdown for this period” uses one color for each of the four groups.
The Table Settings filters and the Show/Hide columns icon change this chart. See “Filters and the Show/Hide columns icon.”
All drivers
Badge: it reads "5 of 17 event columns shown". It changes when columns are hidden.
If no drivers match your filters, the table shows "No drivers to show." Below it, the page says: "Try widening the date range, lowering the mileage threshold, or including inactive drivers."
Search box: type a driver’s name to find the driver. The table shows only the drivers that match as you type. The charts do not change. To clear the search, select the X.
Show/Hide columns icon: opens a panel with HIDE ALL, UNPIN ALL, and SHOW ALL at the top.
HIDE ALL: hides every column except Driver.
SHOW ALL: shows every column.
UNPIN ALL: removes all pins.
Every column has a Pin to left icon, a Pin to right icon, and an on/off toggle (tooltip: "Toggle visibility").
Driver’s toggle is locked.
Turning an event column off here changes the charts the same way the Table Settings filters do.
When all event columns are cleared in Table Settings, SHOW ALL turns them back on, and the charts fill again.
Toggle full screen icon: the table fills the whole window and the site menus are hidden. The same icon exits it.
The table column headers, from left to right: Driver, Employee ID, Grade, Driver Score, Miles / Infraction, Miles Driven, Total Hours, and Total Infractions. After these, the table has one column for each of the 17 event types. Employee ID shows a dash (-) when the driver does not have one.
Column headers: each has a sort icon and a three-dot menu. The menu shows:
Clear sort
Sort by [column] ascending
Sort by [column] descending
Pin to left
Pin to right
Unpin
Hide [column] column
Show all columns
Options that do not apply are gray.
Sort: the table starts sorted by Driver Score, ascending. Choose descending to move the 100% Excellent driver to the top. Sorting changes only the table.
Driver: If a driver’s name shows “Inactive” it means that the driver has no activity for the search dates. If a driver’s name shows “Low mileage” the driver’s Miles Driven is less than the Miles threshold.
Grade: a letter grade from A to F, such as A+, B+, or F. The color of the letter matches the color of the Driver Score badge.
Driver Score: shows a percent and a label in a colored badge. For example, "100% Excellent" in a blue badge, "89% Good" in a green badge, and "0% Failing" in a red badge.
Zero values: show in gray.
Driver names: red text.
Horizontal scroll: the table scrolls sideways. The Driver column stays in place.
Filters and the Show/Hide columns icon are linked
The Table Settings (Show omitted incidents and Filters) and the Show/Hide columns icon in the “All drivers” table control the same setting. A change in one also changes the other.
Clear Mild Speeding in the filters. The Mild Speeding toggle under the Show/Hide columns icon turns off.
Turn off the Mild Speeding toggle under the Show/Hide columns icon. The Mild Speeding box in the filters clears.
Check the box or turn on the toggle. Both show Mild Speeding again.
This works for all four dropdowns.
Both controls change these four parts of the page:
The “Infractions across all drivers, per day” chart.
“Type breakdown for this period”.
“Total Incidents”.
The “All drivers” table.
These controls do not change the Total Infractions column.
Related articles
CONTACT US!
Email us: support@fleetwatcher.com
