Skip to main content

Device Ping/Event Icons Definitions

Event Icon Definition.

Device Ping/Event Icons:

This article explains the update types received from devices — such as Heartbeat or Engine Running — and the icons that visually represent them.
​

These icons appear primarily on breadcrumb trails and in Driver Safety Reports, and may also be used in select other reports to show asset activity.
​

Use this guide to quickly understand what each icon means and how it relates to equipment behavior.

Event Icon

Event

Event Definition.

Engine Turned On

Equipment engine transitions to ON.

Engine Running

Equipment engine remains ON. Standard reporting intervals are once per:

  • 30 seconds (paver/mill installation).

  • 1 minute (on-road installation).

  • 5 minutes (yellow iron/off-road installation).

Engine Off

Equipment engine transitions to OFF.

Transport Begin

Equipment transitions into TRANSPORT MODE.

  • Physical movement of at least 8mph for 15 consecutive seconds with no engine (on the latest configs).

  • Physical movement of at least 8mph for 90 consecutive seconds with no engine (on older configs).

Transport Update

Equipment remains in TRANSPORT MODE (updates at regular reporting interval).

Transport End

Equipment transitions out of TRANSPORT MODE, either with an ENGINE ON event or:

  • Ceasing physical movement for at least 5 consecutive minutes.

Counter/Timer 1

FleetWatcher device recognizes either a load count or supplemental time event from the equipment.

Transition to Sleep

FleetWatcher device transitions to SLEEP MODE (varies by model and config).

Heartbeat Sleep

FleetWatcher device sends HEARTBEAT SLEEP transmissions every 24 hours of inactivity.

Battery Low Alert

Equipment battery voltage drops below acceptable threshold (11v for 12v battery; 22v for 24v battery by default).

Battery Disconnected

FleetWatcher device disconnected from equipment power.

Battery Connected

FleetWatcher device connected to equipment power.

Pinged via UDP

FleetWatcher device transmissions that do not apply to equipment activity/inactivity.

No Status

The FleetWatcher device has not transmitted since the time of install, and has nothing to report.

AEMP

An hourly update from the AEMP feed.

Initial Power Up

Device receives initial source of power during installation; device has reconnected after losing all external and internal power; device is experiencing power issues and requires physical attention.

Did this answer your question?

Related Articles