Introduction
The MMS Job Summary provides an overview of all tracked shifts for a selected date, summarizing truck activity, hauled material, and production KPIs like Tons per Hour and Trucking Cost per Ton (TCpT). It supports quick day-to-day tracking of job performance and material movement.
You can view detailed information by selecting a job and drilling down into paver, trucking, and miscellaneous equipment activities.
Navigation
To access this feature:
Go to: Material Management > MMS Job Summary
Step-by-step Instructions
Open the MMS Job Summary screen.
Use the date selector at the top to pick the day you want to review.
The screen defaults to today’s date but can be adjusted using the calendar pop-up.
Review the list of active shifts:
All tab shows all shifts (Day and Night).
Day tab shows only daytime shifts.
Night tab shows only night shifts.
For each listed shift, view the following details:
Shift Name and timing
Project information
Source and Destination
Shift Tons: Actual vs Target
Tons per Hour (TpH): Actual vs Target
Trucking Cost per Ton (TCpT): Actual vs Target
Tap any shift to open detailed views:
PAVER tab: Displays paver equipment start/stop times, engine times, load times, run times, idle times, and FPM (Feet per Minute).
TRUCKING tab: Lists trucks used, with detailed activity like load times, shift times, run times, idle times, cycle times, and unauthorized stops.
MISC tab: Shows support equipment (water trucks, compactors, etc.) and their engine and shift activity.
Tap any asset within PAVER, TRUCKING, or MISC tabs to view the asset's full shift timeline.
Tap the LCA button next to a shift to view the Load Cycle Analysis (LCA) chart:
The LCA Shift Report visualizes truck and equipment movements during the shift.
Each bar represents Travel, Engine On, Moving, or Transport modes, helping spot bottlenecks or irregular behavior.
Notes
Shift metrics are color-coded for quick assessment of progress against goals.
The LCA report provides an hour-by-hour visual of activity across all assigned trucks and equipment.
Unauthorized stops, idle time, and transport mode time are captured for each asset when available.
Ideal for supervisors and dispatchers to quickly spot issues like delays, low production, or excessive idle time.